Konektivitas 10 Gigabit dengan FS Transceivers Terdepan
Dalam dunia networking modern, FS SFP-10GLR-31-I dan FS SFP-10G-T-30 hadir sebagai dual champions yang menawarkan solusi komprehensif untuk kebutuhan 10 Gigabit Ethernet. Kedua transceiver premium dari FS (Fiberstore) ini menghadirkan performa yang exceptional dengan value proposition yang unbeatable.
FS sebagai global leader dalam optical networking solutions telah membuktikan kualitasnya melalui jutaan unit yang deployed worldwide, memberikan enterprise-grade performance dengan pricing yang sangat kompetitif.
Deep Dive: FS SFP-10GLR-31-I Specifications
Fiber Optic Excellence untuk Long-Range Connectivity
Interface Type: SFP+ 10GBASE-LR untuk single-mode fiber applications Transmission Distance: Hingga 10 km dengan exceptional signal quality Wavelength: 1310nm dengan DFB laser technology untuk optimal performance Fiber Compatibility: 9/125μm single-mode fiber dengan LC connector interface Power Budget: 7.3 dB untuk flexible installation scenarios Digital Diagnostics: Built-in DDM untuk real-time monitoring
Key Performance Features:
- Data Rate: 10.3125 Gbps dengan backward compatibility
- Power Consumption: < 1W untuk energy-efficient operation
- Operating Temperature: 0°C to 70°C (commercial grade)
- MTBF: > 1 million hours untuk exceptional reliability
- Hot-Swappable: Zero downtime installation dan replacement
Deep Dive: FS SFP-10G-T-30 Specifications
Copper Solution untuk Short-Range High Performance
Interface Type: SFP+ 10GBASE-T untuk twisted pair copper applications Transmission Distance: Hingga 30 meter dengan Cat6a/Cat7 cable Connector: Standard RJ45 female dengan integrated magnetics Auto-Negotiation: Support untuk 10G/1G/100M speed auto-detection Power Consumption: < 2.5W dengan advanced power management Cable Compatibility: Cat6a (30m), Cat6 (20m), Cat5e (15m)
Advanced Copper Features:
- EEE Support: IEEE 802.3az Energy Efficient Ethernet
- Link Training: Advanced equalization untuk optimal signal integrity
- EMI Compliance: FCC Part 15 Class A dan CE marking
- Temperature Range: 0°C to 70°C dengan thermal protection
- MDI/MDIX: Auto-crossover untuk simplified cabling
Perbandingan Komprehensif: Fiber vs Copper Solution
FS SFP-10GLR-31-I: Ideal untuk Long-Distance Applications
Keunggulan Utama:
- ✅ Jangkauan Maksimal: 10 km tanpa signal degradation
- ✅ Immune to EMI: Tidak terpengaruh electromagnetic interference
- ✅ Future-Proof: Ready untuk higher speed upgrades
- ✅ Low Latency: Sub-microsecond latency untuk time-critical applications
- ✅ Bandwidth Unlimited: Full 10G performance tanpa distance penalty
Best Use Cases:
- Data center interconnect (DCI) applications
- Campus backbone network connectivity
- Metropolitan area network (MAN) deployments
- Storage area network (SAN) extensions
- Cloud connectivity dengan guaranteed performance
FS SFP-10G-T-30: Perfect untuk Copper Infrastructure
Keunggulan Utama:
- ✅ Existing Cable Utilization: Leverage existing copper infrastructure
- ✅ Cost-Effective: Lower total cost untuk short-distance deployment
- ✅ Universal Compatibility: Works dengan standard network cables
- ✅ Easy Migration: Seamless upgrade dari Gigabit Ethernet
- ✅ Flexible Installation: No special handling requirements
Best Use Cases:
- Server connectivity dalam data center racks
- Switch-to-switch connections dalam same facility
- Workstation high-performance connectivity
- Network attached storage (NAS) connections
- High-bandwidth wireless access point uplinks
Competitive Analysis: FS vs Major Brands
FS vs Cisco Comparison
Feature | FS SFP-10GLR-31-I | Cisco SFP-10G-LR-S | Advantage |
Performance | 10G/10km | 10G/10km | Equal |
Compatibility | Multi-vendor | Cisco optimized | FS Wider |
Price | $89 | $850+ | FS 90% savings |
Warranty | 3 years | 1 year | FS Superior |
DDM Support | Full featured | Standard | Equal |
FS vs Intel/Broadcom Comparison
Feature | FS SFP-10G-T-30 | Intel X520-T2 | Advantage |
Form Factor | SFP+ module | PCIe card | FS Flexible |
Power Consumption | <2.5W | 8W+ | FS Efficient |
Price | $65 | $300+ | FS 78% savings |
Compatibility | Universal SFP+ | Intel specific | FS Universal |
Installation | Hot-swap | System reboot | FS Convenient |
FS vs Finisar/Avago Analysis
Quality Comparison:
- Manufacturing: Same tier-1 factories dengan stricter QC
- Component Grade: Premium components dengan better selection
- Testing: More extensive testing protocol
- Reliability: Comparable MTBF dengan better warranty terms
- Performance: Identical specifications dengan competitive pricing
Technical Deep Dive: Why FS Delivers Superior Value
Manufacturing Excellence
FS menggunakan same manufacturing facilities seperti major brands namun dengan optimized cost structure. Vertical integration memungkinkan quality control yang ketat dengan competitive pricing.
R&D Investment
Continuous investment dalam research and development memastikan produk selalu updated dengan latest standards dan technology innovations.
Quality Assurance Process
- Incoming Material Inspection: 100% component verification
- Production Testing: Multi-stage testing protocol
- Burn-in Testing: Extended operational testing
- Final QA: Comprehensive performance verification
- Packaging QC: Proper handling dan protection
Global Support Network
Worldwide support infrastructure dengan local technical expertise, ensuring responsive customer service dan technical assistance.
Real-World Performance Benchmarks
Latency Comparison Testing
FS SFP-10GLR-31-I Performance:
- Latency: 0.1 microseconds (same as premium brands)
- Jitter: <0.01 microseconds RMS
- Packet Loss: Zero packet loss dalam normal operating conditions
- BER: <10^-12 untuk error-free transmission
FS SFP-10G-T-30 Performance:
- Latency: 2.6 microseconds (industry standard untuk copper)
- Power Efficiency: 15% better than competing solutions
- Signal Quality: Superior equalization untuk maximum reach
- Compatibility: 99.9% compatibility dengan existing infrastructure
Reliability Testing Results
Accelerated Life Testing:
- Temperature Cycling: 1000+ cycles tanpa failure
- Humidity Testing: 85% RH, 85°C untuk 1000 hours
- Vibration Testing: MIL-STD-810 compliance
- MTBF Validation: >1 million hours confirmed through testing
Installation Best Practices untuk Optimal Performance
FS SFP-10GLR-31-I Installation Guide
Pre-Installation Checklist:
- Fiber Quality Assessment: Verify cleanliness dan connector condition
- Power Budget Calculation: Ensure total loss <7.3 dB
- Compatibility Check: Verify switch/router SFP+ slot compatibility
- Environmental Preparation: Check temperature dan airflow adequacy
Installation Steps:
- Fiber Preparation: Clean all connectors dengan appropriate materials
- Module Installation: Insert dengan gentle pressure until click
- Cable Connection: Connect fiber dengan proper strain relief
- Link Verification: Check DDM parameters dan perform link test
FS SFP-10G-T-30 Installation Guide
Pre-Installation Requirements:
- Cable Assessment: Verify cable category dan length limitations
- Power Planning: Ensure adequate power supply untuk switch
- Network Planning: Plan untuk auto-negotiation settings
- Environmental Check: Verify operating temperature range
Installation Process:
- Module Installation: Hot-plug into available SFP+ slot
- Cable Connection: Connect Cat6a/Cat7 cable dengan proper termination
- Configuration: Set speed dan duplex settings if required
- Testing: Verify link establishment dan performance
Cost-Benefit Analysis: ROI yang Menggiurkan
Total Cost of Ownership (TCO) Comparison
FS SFP-10GLR-31-I TCO Benefits:
- Initial Savings: 80-90% cost reduction vs. brand name
- Inventory Costs: Lower stock investment untuk spares
- Maintenance: Longer warranty period reduces replacement costs
- Performance: Identical performance dengan significantly lower cost
FS SFP-10G-T-30 TCO Advantages:
- Infrastructure Leverage: Utilize existing copper investment
- Installation Savings: No fiber installation costs
- Maintenance Simplicity: Standard copper troubleshooting
- Upgrade Path: Easy migration dari existing Gigabit infrastructure
Payback Period Analysis
Average Payback: 6-8 months untuk most deployment scenarios Cost Savings: $500-800 per port vs. equivalent brand-name solutions Performance Impact: Zero performance compromise Risk Mitigation: 3-year warranty vs. typical 1-year coverage
Why Choose Zealotus Network sebagai Trusted Partner
Unbeatable Value Proposition
Zealotus Network menawarkan FS transceivers dengan pricing yang paling kompetitif di Indonesia.
Genuine Product Guarantee
Setiap unit FS SFP-10GLR-31-I dan SFP-10G-T-30 yang kami jual adalah original factory sealed dengan full manufacturer warranty dan technical support.
Extensive Inventory Management
Strategic stock planning memastikan immediate availability untuk urgent deployments dan emergency replacements, supporting your business continuity.
Value-Added Services
- Free Compatibility Testing: Pre-deployment testing dengan your equipment
- Technical Consultation: Expert advice untuk optimal product selection
- Installation Support: On-site assistance untuk critical deployments
- Lifecycle Management: Proactive monitoring dan maintenance services
Product Selection Guide: Choosing the Right Solution
Choose FS SFP-10GLR-31-I When:
- ✅ Distance requirement >100 meters
- ✅ EMI immunity critical
- ✅ Future bandwidth scalability important
- ✅ Existing fiber infrastructure available
- ✅ Long-term investment perspective
Choose FS SFP-10G-T-30 When:
- ✅ Distance requirement <30 meters
- ✅ Existing copper infrastructure
- ✅ Cost optimization priority
- ✅ Quick deployment needed
- ✅ Standard troubleshooting preferred
Hybrid Deployment Strategy:
Combine both solutions untuk optimal cost-performance balance:
- Long-haul connections: FS SFP-10GLR-31-I
- Short connections: FS SFP-10G-T-30
- Result: Maximum flexibility dengan minimum cost
Future-Proofing Your Network Investment
FS transceivers tidak hanya solve today’s requirements tapi juga investment untuk future network evolution. Dengan proven compatibility dan upgrade path yang clear, produk ini ready untuk supporting emerging technologies.
Technology Roadmap Alignment:
- 25G/100G Migration: Clear upgrade path tersedia
- Software-Defined Networking: Full compatibility dengan SDN controllers
- Network Function Virtualization: Support untuk NFV environments
- Cloud-Native Applications: Optimized untuk microservices architecture
Wujudkan Network Performance yang Cost-Effective
FS SFP-10GLR-31-I dan SFP-10G-T-30 memberikan perfect combination dari performance, reliability, dan affordability untuk 10 Gigabit networking needs. Dengan proven track record dan comprehensive support, products ini menjadi smart choice untuk modern network infrastructure.
Hubungi Zealotus Network Sekarang!
Jangan biarkan high transceiver costs menghambat network modernization plans. Dengan FS transceivers dari Zealotus Network, Anda mendapatkan enterprise-grade performance dengan SMB-friendly pricing.
Connect with Our Team:
- Product Consultation: Expert advice untuk optimal selection
- Custom Quotation: Volume discounts untuk large deployments
- Compatibility Testing: Free testing dengan existing equipment
- Implementation Planning: End-to-end project management
Special Promotions:
- Bundle Discount: Additional savings untuk fiber + copper combination
- Volume Pricing: Up to 25% discount untuk quantity orders
- Express Delivery: Same-day Jakarta, next-day nationwide
- Trade-In Program: Legacy equipment credit untuk additional savings
Zealotus Network – Smart Networking Solutions
📞 Contact Zealotus Network Immediately:
🌟 Hotline/💬 WhatsApp:: 0857-8208-3440
📧 Email: sales@zealotus.biz.id
Ingin Konsultasi lebih lanjut? silahkan hubungi sales kami sales@zealotus.biz.id sekarang juga! atau bisa hubungi nomor whatsapp kami disini. GRATIS!! Kami akan memberikan penawaran harga terbaik yang sesuai dengan kebutuhan Anda. Zealotus Network tempat sewa dan jual Produk IT Termurah, Terpercaya dan Terbaik di Jakarta.
“Enterprise Performance, SMB Pricing”
Transform your network infrastructure intelligently. Choose FS transceivers, choose Zealotus Network sebagai your trusted technology partner.
Your 10 Gigabit Revolution Starts Here. Start with FS Transceivers.
